Altus Motorsports

  • 2116 E. Broadway
  • Altus, OK 73505
  • Call Us: (580) 477-1500
  • https://www.altusmotorsports.com/
Print This Page

2024 Cub Cadet® Commercial Zero-Turn Mowers PRO Z 972 SD EFI

Information

2024 Cub Cadet® Commercial Zero-Turn Mowers PRO Z 972 SD EFI

One of the best zero-turn mowers for slopes on the market with steering wheel control. Ample horsepower and dual-wheel traction mean this slope mower can handle up to a 46% grade.

Tackle inclines confidently with this zero-turn slope mower. It cuts straight lines on slopes up to 25 degrees.

A powerful slope mower with 38.5 HP Kawasaki FX1000v (999cc) EFI engine and 16cc HTG Parker transmission

72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements

3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty

Dual rear wheels and weighted front rims give this steep slope mower traction on up to a 46% grade. 12-volt outlet kit and electronic power deck lift included

Photos

Highlights

  • Altus, Oklahoma
  • 2024
  • Cub Cadet®
  • Commercial Zero-Turn Mowers PRO Z 972 SD EFI
  • Model: FX Series EFI | Model Number: 1000V
  • 16cc HTG Parker
  • Available
  • 85"
  • Cutting Range: 1” to 5” in 1/4” increments | 49"

Specifications

  • 2024
  • Cub Cadet®
  • Commercial Zero-Turn Mowers
  • PRO Z 972 SD EFI
  • Zero-Turn Mower
  • Model: FX Series EFI | Model Number: 1000V
  • High Density
  • Twin
  • 999cc
  • Output: 38.5HP
  • Kawasaki®
  • Fully pressurized
  • Ignition Key
  • Blade(s): Triple-blade / High-lift blade (standard) Marbain Blade
  • Mechanical
  • 16cc HTG Parker
  • Separate Choke
  • Type Friction: Disc | All-wheel Drive
  • Charging System: 15 amp regulated
  • Forward: 14 mph / 22.5 km/h | Reverse: 6 mph / 9.5 km/h
  • Deck: 72 in
  • Cutting Range: 1” to 5” in 1/4” increments | 49"
  • 88"
  • 85"
  • 2.0 qt. US (1.89 L)
  • Dual 7.45 gal. US (28.2 L)
  • 1850 lbs.
  • 8" sealed cast aluminum housing (maintenance-free)
  • fabricated 7ga. (.187”) steel shell | 7ga. top plate 7ga. bottom reinforcement ¼” rolled leading edge